Wardrobe IKEA hack

It's the simple things isn't it? I recently decided my daughter's wardrobe was too boring. I could either update it or I could buy a new one (was thinking of a smaller one from IKEA). But then I thought I'd rather extend the life of this one if I can and save the cash.

So… I thought I'd wallpaper it. It's a bit fiddly and I still haven't done the sides but if you've got a couple of hours or so it's worth doing. Here's the before...

and the after

Oh, and here's the cheap Rast drawers I got from IKEA (£20) which I painted with rustoleum's chalk paint in duck egg blue.  

 And here it is in situ in the room with the wallpaper patchwork behind. :)

Inheritance hooks

OK, I'm a weak woman and I did this ickle bit of DIY… but so light and easy I figured it'd be ok?

So my Nannah gave me some old silver coated spoons when I first set up house. She's moved on to a better place now and I wanted to do something with them that would have them on display. Having checked with my Mum that she would be ok with me bending them I thought I'd use them to hang my favourite implements on. I know the hooks aren't evenly spaced but I wanted them to look a bit rough and homely, I have a tendency to want things evenly spaced, so challenged myself not to on this one.

Here's the solution that I came up with:

1. Get a short length of wood.
2. Paint it if you want to, and paint the spoons if they're not lovely old ones like mine.
3. Drill 6 holes in pairs, about .7cm apart.
4. Feed the string through, back to front, then front to back and repeat, tie at one end.
5. Get your spoons and some pliers, bend the spoon about half way along the handle using the edge of the pliers, until there is about a 30 degree angle on it.
6. Then move the pliers down about 1 cm and repeat.
7. Bend to double up the spoon with your fingers for the last bit.
8. Feed the Spoon handles through the loops on the front until it hits where the spoon handle ends and the spoon shape begins.
9. Tighten the string and tie the other end off.
10. Position where you want the wood on the wall.
11. Drill (I used a 3.5mm bit) through the wood at each end and into the wall.
12. Take the wood off the wall and drill a hole for the raw plug, assuming you're going into plasterboard ( used a 6mm bit for this and light fixture and fitting plastic plasterboard raw plug).
13. Pop your raw plug in. 
14. Screw through the wood and into the raw plug with a screw.

Dining room panelling

Following my recent mega-project in the Lounge, I wanted something similar but (much!) simpler in my dining room. And here it is (excuse the pano shot):

It was dead simple to do, and didn't take more than 5hours in total. The skirting cost about £20 for two lengths, and the strip wood about £13, filler around £4 - so as I had the paint and screws already it all cost just under £37 all in. 

Here's my simple 6-step guide to how I did it:

1. I needed to square of the skirting board as I couldn't be bothered to chisel away the shaped edge. So I bought two lengths of board of the same depth and screwed them onto the existing boarding upside down and the wrong way up. Or to be more specific, I countersunk screws having pre-drilled pilot holes in both the new and existing board to prevent splitting the wood. I used 1" screws.

2.  Then I cut four strips of plained wood (45mmx18mmx1800) in half and screwed them into the wall (no raw plugs as they aren't taking any weight, and I was feeling lazy) 33cms apart (just because that looks about right for the gaps I had). Incidentally, I centred(ish) the middle of one of the 'panel' sections on the corner.

3.  I then added a baton, same dimensions as the rest of it but a little longer - 2400mm as that meant no joins) and added it to the top of the strips on the wall. I had some gaps as I wanted it level, but it worked out really well as the floor is very flat. (I know that sounds obvious, but you'd be surprised).

4.  I then filled in all the gaps including:

• countersunk holes in the timber
• behind the new skirting board to fill the gap (took a whole pot of filler!)
• the small gaps between the wall and the top strip
• the small gaps between the uprights and the top strip

5. I primed the wood with an all purpose primer and had to wait 24 hours to wait for it to dry - grr.

6.  I added a couple of coats of paint from the bedroom project I'd done upstairs (a lot of mileage out of a £10 pot of paint!) and I was AMAZED how well it matched my dresser! :) RESULT. Remember if I can help you out with advice on a similar project, email me at okidokeyolatoke@gmail.com. And don't forget to check my shop page if you are looking for a truly unique gift for a loved one.

It was a long journey - but so worth it...

So it's done. I'm finished. My longest project ever.

When I stopped work I really wanted to work on the house's 'Magnolia-ness' and my biggest project was the lounge.  So, points to consider in this room:

1. It's North facing - this ruled out my favourite colours of Duck Egg and Eau de Nil as they would have been way too cold. I wanted something that would be warm, but something with depth, yet something which would allow the light to bounce around. Not much then!

2. It's a new build - I wanted to do some kind of wood panelling effect in there that would work in a new-build without looking tacky or like I was trying to make it something it wasn't, and yet add the character I felt it so badly needed.

3. The shape of the room - it's longer than it is wide, with the window on the narrow wall.

4. My furniture, specifically the sofa, which is a 3 seater from the old place. Ideally I would have a two seater which would be more flexible and less of a block, but there is absolutely no point replacing our functional cheap sofa with an expensive one til the kids are grown.

5. Budget - I've not done my sums yet, but I didn't wanna spend a fortune in here, and I don't think I did. The wood was the biggest expense.

6. Practicality - it has to be resistant to kids and it has to hide toys so I can clear them all away at the end of the day for the adult space to relax.


Inspiration and sources:

Panelling:
I saw this really helpful pin to an article on pinterest, so that gave me the idea for the height of the wainscoating (which I assume to be panelling)

I also saw this pin too which gave me the idea of creating my own frames to fit the size/lengths of the wall, and painting the wall, skirting and dado rail the same colour.

My next challenge was to work out how wide I should make the panels. I decided to make the panels fit the gaps I had and that would mean each section of wall would have different widths of 'frame' - but I did try to keep them as close as I reasonably could.

Here were my first drawings to work out heights and widths etc. 

I needed a 32" height overall from the floor to the top of the dado. Then I went for a 3" gap between the skirting and the frame, a 3" gap between the top of the frame and the dado and a 3" gap between each frame. So the height of each frame would be whatever was left of the height between the skirting and dado, minus 6". Hope that makes sense!

I then measured each wall and with a lot of head scratching came up with 11 panels of the longest wall which meant each frame was 12"1/2. The frames on other walls were mainly the same, but the ones in the bay window walls were as narrow as 9"3/4.

Then the loooong process of cutting the wood to size. I bought long strips of 10cm wide by 1cm deep timber. I cut them at 45 degrees on my Dad's metal angle saw jig thingy and I have no idea how many cuts I made. Frankly, it was traumatic by the end!

So here was my first panel, thought I'd start with an easy one (not!). I was determined to work around the sockets etc in that corner, So I did the best I could and filled the rest with filler. I started off tacking them into the wall, but I didn't like that look, so I ended up using no more nails, which was much more forgiving!

So here's the end of the wall getting finished:

This is the point at which my dear Mum and Dad came to say "Hi" and see how I was getting on.  What you can't see to the right on the next wall (under out TV) was two double sockets, two TV arial sockets and two phone sockets. UGLY. My Dad casually mentioned I should try to cover them up. Which is how I spent pretty much the whole of the next day fashioning this out of the mdf and the timber I was using and some corner brackets. Thanks Dad… ;) No really though, worth it. So it's a removable cover with a big hole in it (behind the unit) for all the wires to go into the consoles and then back through up the wall to the TV. It messed up the panelling on my first wall I'd done, but I decided to live with it.

Here are some progress shots:

I then primed all the frames and dado (oh, I added a decorative strip to the dado, just a simple one but enough to give it some 'weight'), sanded the skirting and applied at least three coats of iced latte duracoat from home of colour (Homebase own brand). I could go into how many blinking tester pots I bought and how different they are from the colour guide books which are RUBBISH AND NOT WORTH THE PAPER. But I won't. Honest.  And that was the panels done. Only took four weeks……….. (not everyday and all day but still).

Above the dado

Next I lined the upper parts of the walls with vertical lining paper - apart from the long uninterrupted wall (see below). I went with 'white scatter' from the earth balance range from Crown. It's basically an off white. 

All my paints were chosen to try and be a good match in tone and shade to the wallpaper which was going on the upper half of the feature wall. It was (half price) from Laura Ashley, it's called Lilac and we went for the dark linen/white colouring. It only took a couple of rolls and had some spare then.

Here it is going up one night. It's worth mentioning I had lined the wall by hanging lining paper horizontally first. I did this to my last house and it really seems to make a difference and feel more luxurious, somehow!  

I love love love it! I don't understand how, but it's made the room feel wider and thus squarer. Result!

Frames:
I also got to work on some frames which had been varnished wood. They displayed a photo my Grandpa had taken in the 1970s, and a pen and ink he had then done of the photo.

I also got to work on the mirror. I need to re-mount them with a darker colour mount (maybe the iced latte type colour) but they look good for now.

 Storage:
I also took the plunge and replaced the toy chest with this three drawer unit. My poppet can get toys in and out much easier and it is probably safer than the heavy lid of the old chest. It was from Dunelm Mill. I was so glad it was Ivory as described rather than the yellowy ivory you can find. Phew! (by the way I don't get money or reward for these links, they are just to save you searching).

And so here the room is, in all its glory.

 Apologies, I really need to get a decent daytime shot of the room so it doesn't look so yellow on the screen from the artificial lights. :(

Bedroom finished at last!

I started on our bedroom quite some time ago, but haven't blogged about it as I never quite felt it was ready for it. But I think I'm finally there. As you may know we moved into a new build about 1.5 years ago now and I've been desperately trying to inject some character into it. One of these projects was our room. I LOVE our bedroom - built in wardrobes and an over the stairs cupboard has set us up for success in keeping it as reasonably clutter free as we can for everyday living. It's also light and airy - and even though it's North facing it always seems to be bathed in (sun)light. 

So - my challenge was to see how to add character without losing the lightness and clarity of the room. Also - how could I integrate the black frames from our last (period) property without them looking out of place? (We spent a fair bit on the custom sized one signed by everyone at our wedding so I didn't want to mess with it, well, not yet anyway!).

I love our head and footboard on the bed and because they are white slatted I thought some kind of muted colour behind them would work well. But I didn't want to do the whole wall because it would become too dominant and be too flat. I didn't really want to introduce a pattern either. So I bought some wood edging stops from Homebase (I also used these downstairs in the lounge/living room), and cut them at 45 degree angles to form a three sided frame to go around our bedhead and nailed/glued in place. I then painted the frame and the interior of it in a lilac/grey colour.

For me this really:
1. Made the bedhead pop
2. Didn't dominate the room too much
3. Added character (And I hadn't seen this anywhere else - although I doubt I'm the first to think of it)
4. Gave me a frame to work in some other bits
5. Looked good despite the fact the bed is off centre on the wall


I then hung three cardboard lids of bird shaped boxes (I'll replace with ceramic white ones if I can ever find the perfect ones) I already had once I'd painted them up in an off white.

I added two frames I'd bought on sale in M&S and put black and white baby pictures of my step-daughter and daughter in them (not sure what I'll do for bump when he arrives, but I'll cross that bridge later).

Then time passed, life got busy - until I finished off a few other big projects. In that time we were faced with exploring little fingers of my 20 month old, who loves to pick up ANYTHING on the side tables, books, phones (not so bad), academic papers of my husband's, cuff links, pens, you name it. When she picked up the house phone and dialled 666, which could easily have been 999, I knew I needed to take action. (Eek!)

In our dumping ground, sorry, I mean study, I've had these wooden shelving boxes without a back, they were originally part of an IKEA set, but I thought I could just pop them on the wall and paint them all the same colour as the frame I'd done earlier. The effect would be similar to palette shelves. So that's what I did…  They are just perfect for the purpose, dead chuffed! I just used two small L shaped metal brackets (literally 1.5 cm wide and each side of the L was about 2cms) per box. They won't take a tonne of weight but certainly good enough for what I wanted. 

Finally, I bought a Jones clock in Waitrose I'd been resisting for at least 6 months, and rediscovered (in the process of sorting out the dumping ground/study) some flower lights, one set went in the lounge, the other around the grey/lilac frame on the wall. 

A spring clean later and hubby and I both feel like it's a hotel holiday room, finally a place we can chill out. And another room ticked off in my nesting list of things to sort before bubs comes! You may be able to see the three hearts on the right of the top image - one for each child. :) Speaking of which, check out my baby room update to follow soon...